Add:No.411, Wunan Road, Qian Huang, Wujin District, Changzhou City, Jiangsu Province, China
Walking tractors and hang 2 gears and reverse gear. Left side of the transmission(hand), reverse gear fork shaft above the air, twist a 1 fasten the bearing cap bolt(M8x25), with a length of 180 mm, 4 mm diameter round bar into the bolt hole, atthe fork and push, you can put the gears into neutral. Then take off the 2 gears, the clutch-gearbox check oil hole below the side, twist a 1 fastening bolts of the gearbox (M10x85), with specifications of round 1 at 2, 3 shift fork, slightly and push, 2speed gear back into the neutral position.
While hanging on tractors 3-speed and 1 block. Pick open 3 block, you want to exclude in the aforementioned hole, pick the open 1, above the gear box oil inspection hole screw hole excluded below, specific methods of operation this time.
Related Industry Knowledge
- Generator parts wear what are the b...
- How to buy good quality Harvester a...
- Harvester accessories maintenance
- Talk about Harvester accessories th...
- Tractor used to do three tasks to a...
- Tractor operation experience details
- Handle of walking tractor clutch re...
- Tractors start skill
- Tractor right downhill towards method
- Tractor tips for starting